VECTOR kitelines Quad Pro - 4x25m
High performance kite lines.
Note: For more information on how to choose the right lines for you kite please see more information on the “Description” section bellow.
Total customer satisfacion policies
HOW TO CHOOSE YOUR VECTOR KITELINEDifferent kiting disciplines require different types of lines, below you can see an overview on which lines VECTOR recommends for each discipline.
|kite discipline||Vector line series||Top line strength||Brake line strenght|
Vector Quad Pro
|25 - 110Kg||-|
Vector Quad Pro
|170 - 210Kg||75 -110Kg|
|kite buggying||Vector Quad Pro||170 - 300Kg||75 - 110Kg|
|landboarding/snowkiting||Vector Quad Pro||300 - 375Kg||300 - 375Kg|
|kiteboarding||Vector Quad Pro||300 - 500Kg||300 - 375Kg|
Which line strength you should use depends on a number of factors. Ideally one would use multiple line-sets for the same kite for different wind speeds to get the best possible performance. You can imagine that a 2m 4-line foilkite flies great in 20 knots on 200kg steering lines, but fly that same kite with the same lines in 10 knots and you will notice that the lines sag, making steering less responsive.
Even pilot skill and riding style comes in to play when we look at buggy racers, smooth technical racers will use 200 to 250kg steering lines where heavier and/or more aggressive racers will use 300kg lines or even stronger.
Generally high winds and/or heavier pilots require stronger lines.
Line lenght is very much preferential, the rule of thumb is: Shorter lines make steering more direct with the sacrifice of low end performance and long lines give the kite a better low end at the sacrifice of kite responsiveness.
Dyneema® is without a doubt the best possible line to use for kiting, however there are a few things to look out for when using Dyneema® lines;
Knots - Dyneema® handles knots poorly, this is why the lines have sleeves at the ends where the knots are, the sleeves are there to protect the line itself.
As an example: put a knot in a 200kg line and you will cut its breaking strength in half and under tension the line will break right at the knot.
Melting - In comparison to other kite flying lines such as Nylon, Dacron or Aramid/Kevlar, Dyneema's melting point/temperature is lower so if you ever tangle your 4-line powerkite with a single line kids kite (which are generally flown on Nylon lines) chances are you'll lose.
For more information about Vector kitelines please visit: http://www.vectorkitelines.com/